{"product_id":"bike-lights-front-and-back-rechargeable","title":"Maketheone Bike Lights Rechargeable 1000‑Lumen Headlight \u0026 Tail Light Set with Wireless Remote, 85° Beam","description":"\u003cp\u003e\u003cstrong\u003eMakeTheOne Bike Lights Front and Back is a rechargeable headlight and taillight kit with a wireless remote and turn signals designed to improve visibility and control while cycling at night.\u003c\/strong\u003e\u003c\/p\u003e\n\n\u003cp\u003eThis compact bundle includes a 1000-lumen headlight, a programmable rear light, a handlebar remote, two USB charging cables and mounting binders so you can install a full front-and-back lighting system in minutes. The set mixes a wide 85° beam and multiple front lighting modes with rear turn signals and alert flashes, letting riders direct traffic awareness without removing hands from the bars. Components arrive paired and ready; both lights are USB-rechargeable for convenient reuse.\u003c\/p\u003e\n\n\u003ch3\u003eHow bright is the headlight and how long does it run?\u003c\/h3\u003e\n\u003cp\u003eThe front lamp produces up to 1000 lumens with an 85° wide beam and a spot option for longer sightlines. On a full charge it delivers roughly three hours of continuous operation depending on mode and environmental conditions.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003e1000-lumen maximum output\u003c\/li\u003e\n  \u003cli\u003e85° flood beam plus spotlight mode for distance\u003c\/li\u003e\n  \u003cli\u003eApproximately 3 hours of service time on full charge\u003c\/li\u003e\n  \u003cli\u003eUSB fast charge: about 1 hour to full\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWhat lighting modes and controls are available?\u003c\/h3\u003e\n\u003cp\u003eThe headlight cycles through six modes using a single IO button: multiple flood and spot combinations plus slow and fast flashes. The rear light supports left\/right turn signals and combined flash patterns operated through the supplied handlebar remote for quick, one-handed signaling.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eFront: high flood, low flood, spotlight, combined, slow flash, fast flash\u003c\/li\u003e\n  \u003cli\u003eRear: left turn, right turn, double flash and warning strobe patterns\u003c\/li\u003e\n  \u003cli\u003eRemote: dedicated left\/right buttons and combined press for double flash\u003c\/li\u003e\n  \u003cli\u003eSide red headlight indicator and power status LED for quick checks\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eHow do I mount and pair the lights and remote?\u003c\/h3\u003e\n\u003cp\u003eInstallation uses threaded binders that screw into each light and secure to handlebars, seat posts or saddle rails. The tail light and remote are factory paired; re-pairing is done by putting the tail into pairing mode and pressing the remote. Aim and tighten mounts, then test the remote functions before riding.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eScrew binder onto lamp, fasten to desired bike part, adjust angle\u003c\/li\u003e\n  \u003cli\u003eTail and remote pre-paired; long-press tail IO to re-pair if needed\u003c\/li\u003e\n  \u003cli\u003eRemote binder mounts to handlebar for thumb access\u003c\/li\u003e\n  \u003cli\u003eIncludes two USB cables for charging both lights simultaneously\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWhat care and safety tips should riders follow?\u003c\/h3\u003e\n\u003cp\u003eDo not shine the beam directly into people’s eyes, avoid submersion (rainproof only), and recharge when brightness dims. Turn lights off when not in use to conserve battery and inspect mounts periodically to ensure a secure fit.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eRainproof design — do not soak or submerge\u003c\/li\u003e\n  \u003cli\u003eAvoid pointing beam at eyes to prevent glare injuries\u003c\/li\u003e\n  \u003cli\u003eRecharge when beam dims; charge time ≈ 1 hour\u003c\/li\u003e\n  \u003cli\u003eTurn off lights to save battery during storage\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cp\u003eWho is this for: Cyclists who want a complete rechargeable lighting and signaling solution for commuting, road or mountain riding. The MakeTheOne kit suits riders who need a powerful front beam, clear rear signaling with a handlebar remote, and quick USB recharging — ideal for urban commuters, evening training rides, and leisure cyclists seeking added visibility and safety.\u003c\/p\u003e\n\u003csection class=\"product-faq-snippet\"\u003e\u003ch3\u003eFAQ\u003c\/h3\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: How long does the headlight run on one charge?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: A full charge delivers about three hours of run time, depending on the selected mode and conditions.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Can I re-pair the rear light with the remote?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: Yes. Long-press the tail light IO until LEDs flash, then press the remote button to re-pair.\u003c\/p\u003e\n\u003c\/div\u003e\u003c\/section\u003e","brand":"Maketheone","offers":[{"title":"Default Title","offer_id":48021058977953,"sku":"B08NXGDKF4","price":76.1,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0758\/6532\/5729\/files\/maketheone-front-headlight-front-view.jpg?v=1791306895","url":"https:\/\/canadiansporting.ca\/products\/bike-lights-front-and-back-rechargeable","provider":"Canadian Sporting","version":"1.0","type":"link"}