{"product_id":"dock-brackets-hardware-stationary-floating-dock-pole-post","title":"JYINCPED Dock Brackets for 2\" ID Posts U-Shape Side Mount with Backer Plate, Rust‑Proof Iron","description":"\u003cstrong\u003eJYINCPED Dock Brackets Hardware are heavy‑duty U‑shape side leg pipe holders that bolt to a dock frame and secure 2\" ID dock posts while allowing smooth vertical movement with changing water levels.\u003c\/strong\u003e\n\n\u003cp\u003eThese dock post brackets are engineered to fasten to the side of wooden floating or stationary dock frames and guide the pole legs so the dock rises and lowers naturally. Built from thick iron with a rust‑proof baked finish, the components include backer plates, carriage bolts and set bolts so you get a complete mounting solution for 2\" ID round dock posts.\u003c\/p\u003e\n\n\u003ch3\u003eHow do these brackets fit and hold a dock post?\u003c\/h3\u003e\n\u003cp\u003eThe U‑shape bracket accepts the dock post and compresses against it with two side set bolts that prevent lateral movement while still permitting vertical travel. The included 5\" x 5\" backer plate spreads load across the frame to limit wood compression.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eBracket hole size: 2.12\" x 2\", compatible with 2\" ID poles\u003c\/li\u003e\n  \u003cli\u003eU bracket thickness: 0.425\" for rigidity\u003c\/li\u003e\n  \u003cli\u003eBacker plate thickness: 0.57\" for frame protection\u003c\/li\u003e\n  \u003cli\u003eSide set bolts let you snug the post without removing it\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWhat are the durability and corrosion resistance features?\u003c\/h3\u003e\n\u003cp\u003eEach part is fabricated from substantial iron and finished with a rust‑proof baking coat to resist moisture, splashes and seasonal exposure. The bracket thicknesses are chosen to provide long‑term structural support under typical dock loads.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eIron construction for high strength and impact resistance\u003c\/li\u003e\n  \u003cli\u003eBaked corrosion‑resistant coating for outdoor longevity\u003c\/li\u003e\n  \u003cli\u003eSolid backer plates reduce fastener pull‑through in wood frames\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eHow easy is installation and adjustment?\u003c\/h3\u003e\n\u003cp\u003ePre‑punched mounting holes line up with standard carriage bolts (hardware included) so you can fasten the bracket directly to timber frames. Once mounted, the shoulder nuts and set bolts allow quick height adjustments to let the dock float freely with changing water levels.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eMount with four 3\/8\" carriage bolts per bracket (included)\u003c\/li\u003e\n  \u003cli\u003ePre‑drilled holes simplify alignment and reduce drilling time\u003c\/li\u003e\n  \u003cli\u003eSet bolts allow tightening or loosening without removing the post\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWhich post sizes and dock types are compatible?\u003c\/h3\u003e\n\u003cp\u003eThe bracket hole measures 2.12\" x 2\" to accommodate dock posts with a 2\" internal diameter — the common 1.5\" schedule 40 pipe has an actual O.D. close to 1 7\/8\" and fits well. These brackets work on floating docks, stationary piers and corner stabilizing applications where side mounting is required.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eDesigned for 2\" ID round dock posts (fits 1.5\" schedule 40 O.D.)\u003c\/li\u003e\n  \u003cli\u003eSuitable for wooden floating and stationary dock frames\u003c\/li\u003e\n  \u003cli\u003eCan be mounted inside or outside the dock frame as needed\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cp\u003eWho is this for: boat owners, marina managers, DIY dock builders and waterfront property owners who need a dependable, maintenance‑friendly bracket to secure dock legs while allowing vertical travel. If you want robust hardware that spreads load across the frame, resists corrosion, and installs with common fasteners, these JYINCPED dock brackets provide a practical, long‑lasting solution.\u003c\/p\u003e\n\u003csection class=\"product-faq-snippet\"\u003e\u003ch3\u003eFAQ\u003c\/h3\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Will these brackets fit 1.5\" schedule 40 dock pipe?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: Yes. The bracket hole fits a 2\" ID post; the common 1.5\" schedule 40 pipe has an actual O.D. near 1 7\/8\" and fits securely.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Are bolts and plates included with the brackets?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: Yes. The package includes 2 dock post brackets, 2 backer plates and an 8‑piece carriage bolt kit with necessary bolts.\u003c\/p\u003e\n\u003c\/div\u003e\u003c\/section\u003e","brand":"JYINCPED","offers":[{"title":"Default Title","offer_id":48026401570977,"sku":"B0F9F5QNPD","price":118.18,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0758\/6532\/5729\/files\/jyincped-dock-bracket-front-view.jpg?v=1791370649","url":"https:\/\/canadiansporting.ca\/products\/dock-brackets-hardware-stationary-floating-dock-pole-post","provider":"Canadian Sporting","version":"1.0","type":"link"}