{"product_id":"peakrider-zoom-ebike-hydraulic-brake-upgrade-kit","title":"PeakRider eBike Hydraulic Brake Upgrade Kit, 2-PIN Connector+160mm Rotors Black, Pre-bled Motor Cut-off","description":"\u003cp\u003e\u003cstrong\u003ePeakRider Zoom eBike Hydraulic Brake Upgrade Kit is a ready-to-install dual-piston hydraulic braking system with motor cut-off, pre-bled mineral oil, and 160mm rotors for safer, stronger stopping on most e-bikes.\u003c\/strong\u003e\u003c\/p\u003e\n\n\u003cp\u003eIf you ride an e-bike and want an upgrade from mechanical or worn hydraulic brakes, this kit combines faster stopping power with built-in motor cut-off safety. It arrives assembled and pre-bled, so you can replace your existing brakes with minimal fuss. Before ordering, confirm your e-bike’s connector (2-pin or 3-pin), rotor size compatibility, hose routing, and that your frame accepts left-side caliper mounting.\u003c\/p\u003e\n\n\u003ch3\u003eHow does the motor cut-off sensor protect my ride?\u003c\/h3\u003e\n\u003cp\u003eThe integrated motor cut-off sensor immediately interrupts power to the motor as you apply the brake, reducing torque and shortening stopping distance. This prevents the motor from fighting the braking force and helps maintain control during sudden stops.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eAutomatic power interruption at brake activation\u003c\/li\u003e\n  \u003cli\u003eAvailable in 2-pin or 3-pin connector options to match your e-bike\u003c\/li\u003e\n  \u003cli\u003eReduces wheel torque for more predictable deceleration\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWhat braking performance can I expect day-to-day?\u003c\/h3\u003e\n\u003cp\u003eEach caliper uses dual pistons to deliver consistent, strong clamping force on the rotor, so you’ll notice quicker, more confident stops under load. Semi-metallic pads are pre-installed for a balance of quiet operation and long life—suitable for commuting, trail riding, or heavier e-bike weight loads.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eDual-piston calipers for higher stopping power\u003c\/li\u003e\n  \u003cli\u003ePre-installed semi-metallic pads for reduced noise and durability\u003c\/li\u003e\n  \u003cli\u003ePre-bled with eco-friendly mineral oil—ready to ride immediately\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWill this kit fit my e-bike frame and setup?\u003c\/h3\u003e\n\u003cp\u003eThe kit is compatible with most standard e-bikes and mountain bike frames using 160mm rotors and left-side caliper mounting. Hose lengths are fixed at front 950mm and rear 1850mm, so verify these against your frame routing and wheelbase; very long frames, cargo bikes, or internally routed systems might need extended hoses or professional fitting.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eIncludes 160mm rotors—confirm rotor size compatibility\u003c\/li\u003e\n  \u003cli\u003eFront hose: 950mm (37.4in); rear hose: 1850mm (72.8in)\u003c\/li\u003e\n  \u003cli\u003eCaliper designed for left-side mounting only; measure before purchase\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eHow easy is installation and ongoing maintenance?\u003c\/h3\u003e\n\u003cp\u003eBecause the system ships pre-bled and with pads installed, installation is straightforward for anyone familiar with brake swaps—mount calipers, route hoses, attach rotors, and connect the motor cut-off plug. Maintenance follows typical hydraulic brake care: check pad wear, keep rotors clean, and service hoses if damaged.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003ePre-bled mineral oil system reduces initial setup steps\u003c\/li\u003e\n  \u003cli\u003ePlug-and-play motor cut-off in 2-pin or 3-pin options\u003c\/li\u003e\n  \u003cli\u003eSimple pad replacement and routine inspections recommended\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cp\u003eWho is this for: The PeakRider Zoom kit suits e-bike riders who want an immediate improvement in braking strength and safety—commuters, light cargo users, and recreational e-MTB riders who have standard rotor mounts and typical frame sizing. It’s especially useful if you need a pre-bled, plug-compatible replacement with reliable stopping power and long-lasting semi-metallic pads. If your bike has nonstandard routing, extended wheelbase, or requires right-side mounting, consult a mechanic or PeakRider support before purchasing.\u003c\/p\u003e\n\u003csection class=\"product-faq-snippet\"\u003e\u003ch3\u003eFAQ\u003c\/h3\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Does the kit include rotors and pads?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: Yes—160mm rotors and pre-installed semi-metallic pads are included and ready to use.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Which connector types are available for the motor cut-off?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: The kit is offered with either a 2-pin or 3-pin motor cut-off connector—choose to match your e-bike wiring.\u003c\/p\u003e\n\u003c\/div\u003e\u003c\/section\u003e","brand":"PeakRider","offers":[{"title":"Default Title","offer_id":48030885511329,"sku":"B0DKXHZG2V","price":219.15,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0758\/6532\/5729\/files\/peakrider-zoom-front-view.jpg?v=1791414940","url":"https:\/\/canadiansporting.ca\/products\/peakrider-zoom-ebike-hydraulic-brake-upgrade-kit","provider":"Canadian Sporting","version":"1.0","type":"link"}