AceSupever 255x80 (10x3.0) Off-Road Tire & Inner Tube Set — 10" Scooter, 85mm Tread, 125kg Load

AceSupever 255x80 (10x3.0) off-road tire plus inner tube is a single replacement set engineered to fit 10" electric scooter rims and support up to 125 kg (276 lbs) at up to 50 PSI.

This tire-and-tube pair is made from durable rubber and designed for scooters that take 10-inch wheels. The assembled outer diameter measures approximately 245–255 mm (about 10 inches), with an 85 mm (3.35 in) tread width that balances traction and stability on mixed surfaces. The kit includes one tire and one inner tube with a 90° dust-cap valve so you get everything required for a direct swap on compatible scooters.

How will this tire perform off-road and on rough pavement?

The 255x80 tire profile provides a wider contact patch than standard scooter tires, improving grip on loose surfaces and reducing the risk of pinch flats. The rubber compound and tread depth are selected to maintain traction while resisting cuts and abrasion from gravel or debris. It is not a puncture-proof tire—good maintenance and the correct pressure are still required.

• Tire width: approx. 85 mm (3.35 in) for better surface contact
• Outer diameter after installation: ~245–255 mm (10 in)
• Robust rubber construction for abrasion resistance
• Inner tube included to restore air inflation and ride feel

Will this set fit my 10-inch scooter rim and existing wheel setup?

Yes—this set is sized for scooters using 10-inch tires and a rim with approximately 150 mm (6 in) diameter. The inner rim thickness (bead seat) is around 35 mm, which matches common 10" scooter rims. Always compare these measurements to your current wheel to confirm compatibility before purchase.

• Listed sizes: 255x80 (10x3.0) tire, inner tube 10x2.5
• Inside rim diameter: approx. 150 mm (6 in)
• Bead seat thickness: approx. 35 mm (1 3/8 in)
• Fits common 80/65-6 and similar 10x3.0 applications

What load and inflation specifications should I follow?

The combined system supports a maximum load of 125 kg (276 lbs) and a maximum inflation pressure of 50 PSI (345 kPa). Staying within these limits preserves tire integrity and handling. Check the scooter manufacturer’s recommended pressures for optimal comfort and tire life, as lower pressures increase cushioning but raise puncture risk if underinflated.

• Maximum load: 276 lbs (125 kg)
• Maximum pressure: 50 PSI / 345 kPa
• Valve type: 90° stem with dust cap included on the inner tube
• Weight of set: approx. 1050 g (37 oz)

How do I install this tire and inner tube correctly?

Installation follows standard tire-and-tube replacement steps: remove the wheel, unseat the old tire, inspect the rim and valve area, insert the new tube slightly inflated, then carefully seat and inflate the new tire to the recommended pressure. Avoid pinching the tube between the bead and rim and spin the wheel to check for any rubbing or misalignment before riding.

• Includes everything in-package: 1 tire and 1 inner tube
• Inner tube comes with a dust cap on the 90° valve for protection
• Recommended to use tire levers and a pressure gauge for safe fitment
• Inspect rim and remove debris before mounting to prevent punctures

Who is this for: This AceSupever 255x80 (10x3.0) tire and inner tube set is intended for electric scooter owners who need a wider, tougher replacement wheel for mixed-terrain riding. It suits commuters upgrading traction, recreational riders tackling rough paths, and anyone whose scooter accepts 10-inch rims and requires a heavy-duty, ready-to-install tire-and-tube combo. Verify your rim measurements and load needs before ordering to ensure a proper fit.