Gofotu .335 Adapter Sleeves for Callaway Drivers — 3‑Pack with Two‑Cog Hosel and Ferrules

Gofotu's 3-pack .335 adapter sleeves let you fit .335‑tip shafts into a wide range of Callaway driver heads, giving you easy interchangeability and precise hosel adjustment.

These aftermarket aluminum‑alloy and PVC adapter sleeves are manufactured to accept .335‑tip shafts and include ferrules, washers and screws so you can mount shafts to multiple Callaway driver families — from MAVRIK and Epic to Paradym, Rogue, Great Big Bertha and newer Ai Smoke and Elyte models. The sleeves are designed with a two‑cog hosel system that provides eight distinct loft/lie positions; markings are oriented for right‑hand use but the sleeves still work with left‑hand heads if you account for reversed markings.

Which Callaway drivers and fairway woods will these adapter sleeves work with?

The Gofotu .335 adapter sleeves are compatible with a broad list of Callaway models across several generations, including both drivers and select fairway woods. They were built to match the tip fit and hosel geometry used on many Epic, Rogue, Mavrik, Paradym/Paradym Ai, Great Big Bertha and XR family heads.

• Compatible families: MAVRIK, Epic Flash, Rogue, Paradym, Ai Smoke, Elyte, Great Big Bertha, XR/XR Pro, X‑Hot 2.
• Includes fit for Epic Max and multiple Big Bertha variants (Alpha, Fusion, 816/815/814).
• Works with both modern and some legacy Callaway heads that accept .335 sleeves.

How do the sleeves let you tune loft and lie settings?

Each sleeve features an upper and lower cog that rotate independently to create eight possible loft/lie orientations. By aligning these cogs and securing the screw with the correct torque wrench, you can change loft and face angle in small, repeatable increments.

• Two‑cog hosel design gives eight adjustment positions.
• Markings assume right‑hand orientation; left‑hand heads still function but markings are mirrored.
• Always use a torque wrench to avoid stripping the screw or damaging the sleeve/head interface.

What hardware is included and what shaft tip size does it support?

The pack supplies three complete sleeves with the small parts needed for installation: ferrule, washer and screw. They are made to accept .335‑inch tip shafts, the common diameter used in many after‑market and OEM graphite shafts.

• Three adapter sleeves per package for multi‑club setups or spares.
• Comes with matching ferrules, washers, and mounting screws for immediate installation.
• Fits .335 tip size shafts — confirm your shaft tip before fitting.

Are there any installation cautions or compatibility notes I should know?

Installation is straightforward but requires care: use the correct torque and tools, verify shaft tip diameter and check that your head’s internal bore matches the sleeve geometry. Because these are aftermarket parts, inspect fit and finish and test alignment at the range before play.

• Use the proper torque wrench to tighten screws; overtightening can damage components.
• Right‑hand markings may appear reversed on left‑hand heads — this is cosmetic, not functional.
• Aftermarket sleeve — confirm visual and dimensional fit before permanent installation.

Who this is for: This 3‑pack of Gofotu .335 adapter sleeves is aimed at golfers, club builders and fitters who swap shafts between Callaway driver heads or want a cost‑effective alternative to OEM sleeves. It's useful if you have multiple shafts to test, need a spare sleeve for travel or fitting, or maintain a club‑building kit for players using MAVRIK, Epic, Rogue, Big Bertha, Paradym/Ai Smoke, Elyte and similar Callaway models.