Innconee corner dock bumpers pair, White, 12 x 3 in with PE core and PVC cover, includes stainless screws

These are two white corner dock bumpers from Innconee designed to protect dock corners and boats; each bumper is made from expanded polyethylene with a PVC cover and includes stainless steel screws and washers for mounting.

If you want to reduce damage to both your dock and vessel during docking, the Innconee corner dock bumpers offer a compact, easy-to-fit solution. The pair of bumpers measure about 12 x 3 inches (30.48 x 7.62 cm), come in white to blend with many dock finishes, and are supplied with mounting hardware so you can install them quickly. Built with expanded polyethylene padding inside a PVC mesh shell, they are intended to absorb impact and resist sun and water exposure for routine marine use.

How will these bumpers protect my dock and boat?

Innconee corner dock bumpers cushion and distribute force when a hull or cleat contacts a dock corner. Their compact profile is tuned for corners and tight spaces where larger fenders won’t fit. Use them to reduce scratches, dents, and repeated wear on wood, composite, or metal dock edges.

• Energy-absorbing expanded polyethylene interior reduces impact transfer.
• PVC mesh cloth exterior resists abrasion and helps shed water.
• Corner-friendly shape fits snugly around dock edges to prevent slipping.
• Two-piece set provides coverage for both sides of a corner or a backup spare.

How easy is installation and what hardware is included?

These bumpers are made for straightforward attachment so you can secure them without specialized tools. Each set includes stainless steel screws and washers that are corrosion-resistant for wet environments. Typical mounting takes only a few minutes per bumper on common dock materials.

• Includes stainless steel screws and washers for durable anchoring.
• Screws suit wood and composite docks; pre-drill pilot holes for metal.
• Compact size simplifies placement at tight corners or on pilings.
• Removable hardware lets you reposition bumpers seasonally as needed.

Will these fit my boat and what sizes do they work with?

The Innconee corner bumpers are sized to serve a broad range of personal watercraft and small-to-medium motorboats where corner protection is needed. At about 12 x 3 inches, they are intended for contact points rather than open-water fendering. Check your docking clearances to confirm fit.

• Overall dimensions: approximately 12" x 3" (30.48 x 7.62 cm).
• Best for hull rubbing at corners, pilings, or narrow slips.
• Work well alongside larger tubular fenders for full-side protection.
• White color integrates with most docks and remains discreet.

How durable are these bumpers in outdoor marine conditions?

Constructed with a closed-cell expanded polyethylene core and a PVC mesh exterior, the bumpers resist compression and shed moisture to preserve their shape. While not indestructible, they are intended to hold up under regular docking use and seasonal exposure when properly installed and maintained.

• Expanded polyethylene resists waterlogging and cushions impacts.
• PVC mesh cloth stands up to abrasion, sunlight, and splash exposure.
• Stainless steel fasteners reduce the chance of rust at mounting points.
• Occasional inspection and cleaning prolong service life.

Who is this for: The Innconee 2-piece corner dock bumper set suits boat owners, dock managers, and waterfront homeowners who need compact, effective corner protection. If you have limited space at a slip, want a neat, white finish on dock edges, or need a quick-install option with included hardware, these bumpers provide a practical, budget-friendly way to reduce docking damage and extend the life of your dock and watercraft.