Ironwood Pacific E-Z Slide trailer bunk pads 8 Pads (3"x10") + 2 BunkEnders, Black — low-friction UV-resistant kit

Ironwood Pacific E-Z Slide Trailer Pads Kit 3 are a set of low-friction bunk pads and end protectors that make launching and loading aluminum and light fiberglass boats quicker and smoother.

These E-Z Slide pads attach to trailer bunks and create a slick surface that helps boats glide on and off the trailer with less effort and reduced wear to hulls and bunk ends. Kit 3 includes eight 3" x 10" E-Z Slide pads and two BunkEnders, plus stainless steel screws for mounting to 4" bunks. Constructed from a high-density polymer, the components are built to resist water, abrasion and UV exposure and are backed by a five-year manufacturer warranty.

How do these pads make launching and loading easier?

The low-friction face of each E-Z Slide reduces resistance between the boat hull and the bunk, so you need less winch tension and fewer pushes to center the boat. BunkEnders protect the bunk tips and give a guided surface when the boat contacts the trailer during retrieval.

• Slick polymer surface reduces drag and sticking.
• Even spacing of multiple pads distributes load and prevents point wear.
• BunkEnders shield bunk ends from impact and abrasion.
• Includes stainless mounting screws for secure, corrosion-resistant attachment.

Will these work for my boat type and weight?

Kit 3 is optimized for unpainted aluminum boats up to 4,000 lbs and is also suitable for many fiberglass hulls up to about 1,500 lbs. Use the kit sizes and counts to match your bunk length and expected load—multiple pads create a load-bearing surface for heavier boats.

• Rated for metal boats up to 4,000 lbs (pontoon, jon, fishing boats).
• Recommended for fiberglass hulls up to 1,500 lbs.
• Designed for installation on 4" wide bunks.
• Available color choices: black (this kit) or white.

How difficult is installation and what tools do I need?

Installation is straightforward—position the pads along your bunks, mark fastener points, and attach with the supplied stainless screws. No specialty tools are required beyond common hand tools and a drill or driver for the screws.

• Supplied stainless steel screws fit 4" bunk boards.
• Requires basic drill/driver and measuring tape for alignment.
• Mounts directly to existing bunk boards—no trimming needed.
• Typical install time: one trailer in under an hour depending on access.

How long will these components last in a marine environment?

Made in the USA from a high-density polymer, E-Z Slides and BunkEnders are formulated to withstand moisture, abrasion and sunlight exposure. The manufacturer backs the product with a five-year warranty against defects, reflecting expected long-term performance under normal use.

• High-density polymer resists abrasion and water absorption.
• UV-stable formulation for reduced fading and embrittlement.
• Five-year manufacturer's warranty for added confidence.
• Stainless fasteners help prevent corrosion at attachment points.

Who is this for: Ironwood Pacific E-Z Slide Trailer Pads Kit 3 is aimed at owners of aluminum and light fiberglass boats who want easier, faster launches and reduced wear on trailer bunks. If you trailer a pontoon, jon boat, or fishing boat and use 4" bunks, this kit supplies a practical upgrade that saves time at the ramp and protects both hull and trailer components.