LUXTRKSTO trailer hub bearing kit 2 Sets L44649 Bearings Kit for 1-1/16" axles, chrome steel bearings & seals

LUXTRKSTO L44649 2-set trailer hub bearing kit supplies all the bearings, races, seals, caps and hardware needed to service two 2000–2200 lb 1-1/16" axles with EZ-lube spindles.

This complete repair kit bundles high-quality chrome steel bearings, matching races, double-lip grease seals, dust caps, cotter pins and rubber plugs so you can rebuild two hubs without sourcing individual components. Each component is packaged to reduce shipping damage, and the kit is designed for common trailers with 1-1/16" straight axles rated around 2000–2200 pounds. The parts emphasize durability, reduced friction and straightforward installation for general trailer maintenance and roadside repairs.

What exactly is included in the 2-set L44649 kit?

The package contains everything needed to service two hubs: bearings, races, seals, caps and mounting hardware. This eliminates multiple trips to parts stores and gives you spare parts for future service.

• 4 × L44649 inner/outer bearings
• 4 × L44610 bearing races
• 2 × 12192TB grease seals (1.25" I.D × 1.98" O.D)
• 2 × metal dust caps (1.98" O.D)
• 2 × cotter pins and 2 × rubber plugs
• Boxed packaging with bubble wrap for protection

How does this kit improve trailer hub performance?

The bearings are made from chrome steel for lower wear and reduced vibration, and the double-lip grease seals hold lubricant in while keeping contaminants out. Together, these features minimize friction, help hubs run quieter and extend component life under normal towing conditions.

• Chrome steel bearings for strength and low wear
• Double-lip seals with spring reinforcement to retain grease
• Seals reduce water and dust intrusion for longer service intervals
• Precision races to ensure proper fit on the spindle

Will these parts fit my trailer axle and how do I install them?

The kit is made for straight axles with a 1-1/16" spindle and ratings around 2000–2200 lb, including many EZ-lube configurations. Installation follows standard hub rebuild steps: remove old bearings and races, seat new races, pack bearings with grease, install seals and caps, and adjust bearing preload with the castle nut and cotter pin.

• Verify axle spindle diameter is 1-1/16" before purchase
• Use a driver or race setter to seat races squarely
• Pack bearings thoroughly with high-temperature wheel grease
• Tap dust caps into place with a wood block or rubber mallet as instructed

Are there any special notes or precautions?

The dust caps in this kit are intentionally slightly oversized to ensure a tight fit; use a wood block or rubber mallet to seat them to avoid denting. As with any bearing service, clean all components, inspect spindles and hubs for damage, and torque bearings and fasteners to manufacturer specs.

• Caps require careful seating to avoid deformation
• Inspect spindles for scoring or wear before reuse
• Follow proper torque and cotter pin installation for safety

Who this kit is for: If you own or maintain small utility trailers, boat trailers or economy RVs with 1-1/16" axles rated near 2000–2200 lb and want a cost-effective, ready-to-install repair solution, this LUXTRKSTO two-set L44649 kit supplies the parts and spares needed for two hub rebuilds. It’s aimed at DIYers, fleet maintainers and weekend haulers who prefer a single purchase that covers multiple services and reduces downtime.