MSSVIGING Trampoline Pole Foam Sleeves 12-Pack, Blue 35.4in PE Foam for 1in (28mm) Poles — UV‑Resistant, Waterproof

MSSVIGING Trampoline Pole Foam Sleeves are a set of twelve 35.4-inch blue PE foam tubes that slip over enclosure poles to restore padding and protect jumpers.

If your trampoline pads or pole covers are worn, cracked, or missing, these replacement foam sleeves offer an affordable way to refresh the enclosure. Each sleeve measures about 35.4 inches (90 cm) long with an inner diameter of 1 inch (28 mm) and an outer diameter of roughly 1.88 inches (48 mm). Two pieces combine end-to-end to cover a full 6-foot (approx. 1.83 m) pole, making them suitable for most round enclosure frames that use a similar 28 mm pole thickness.

How do these foam sleeves fit my trampoline poles?

The sleeves are designed to slide onto poles with an inner diameter near 1 inch (28 mm). Because each piece is 35.4 inches long, you can pair two to reach about 6 feet if your enclosure pole is a single continuous length. They work best on straight poles that match the listed inner diameter and are simple to push into place without tools.

• Inner diameter: 1 inch / 28 mm — measure your pole first
• Each sleeve length: 35.4 in / 90 cm; two sleeves = ~6 ft coverage
• Outer diameter: ~1.88 in / 48 mm for a snug protective layer
• Set includes 12 sleeves to cover multiple poles or both halves

Will these covers hold up outdoors through seasons?

Yes — the sleeves are made from polyethylene (PE) foam formulated to resist water and UV exposure. That means they withstand standard outdoor conditions including sun, rain, and occasional cold without disintegrating quickly. Still, long-term life depends on local climate, intensity of sunlight, and how often the trampoline is used.

• Material: waterproof PE foam for outdoor resilience
• UV-protected formulation helps reduce sun damage
• Suitable for summer heat, rain, and moderate winter exposure
• Avoid sharp objects and chemical cleaners to extend lifespan

How easy is it to install and maintain these pole covers?

Installation is straightforward and typically doable by a single person. The foam is flexible enough to slide over poles yet firm enough to remain in place during normal jumping activity. Maintenance requires only occasional cleaning with mild soap and water and visual checks for tears or compression.

• One-person install — push sleeves onto poles, pair two for full-length coverage
• No adhesives or tools required for most setups
• Clean with mild soap and water; let air dry
• Inspect periodically for splits or excessive wear

What should I check before ordering to ensure compatibility?

Measure your trampoline pole diameter and desired coverage length before purchase. These sleeves have a 1-inch inner diameter and are 35.4 inches long, so confirm whether you need single pieces for half-poles or to join two for full poles. Also compare color and appearance if matching existing padding is important.

• Measure pole outer diameter — product inner diameter = 1 in / 28 mm
• Decide if you need one or two sleeves per pole (each = 35.4 in)
• Quantity: 12 pieces — plan coverage for upper and lower pole sections
• Color: blue — check for aesthetic match with your trampoline

Who is this for: These MSSVIGING foam pole sleeves are aimed at trampoline owners and backyard families who need a quick, budget-friendly way to replace torn or missing pole padding. They suit homeowners, rental property managers, and playground caretakers who want durable, water-resistant covers that are simple to install and compatible with most 28 mm enclosure poles.