TUNORD 13LB Fluke Anchor Kit for 20-32FT Boats, 13LB with 100ft Nylon Rope and Chain

TUNORD's 13 lb hot-dipped galvanized fluke anchor kit includes chain, 100 ft marine-grade nylon rope, and stainless fittings—designed to secure 20–32 ft boats in both salt and fresh water.

If you need a compact, corrosion-resistant anchoring solution for a pontoon, fishing boat, small sailboat, or deck launch, this all-in-one kit provides the essential hardware to set and hold position. The package pairs a proven fluke-style anchor with a short length of heavy chain and a long nylon rode that cushions load and resists chafe, plus galvanized shackles and a stainless thimble for reliable connections. Materials and dimensions are selected to suit 20–32 ft vessels and to withstand marine environments without frequent replacement.

How does the anchor perform when setting in typical bottom conditions?

The fluke design digs quickly in soft sand and mud and offers reasonable holding in grassy bottoms. Its lightweight and broad flukes give good penetration for small-boat applications while remaining easy to recover. For hard or rocky bottoms, the anchor may need a different style or additional scope to hold securely.

• 13 lb hot-dipped galvanized fluke for fast penetration in sand and mud
• Wide flukes increase bite area for improved holding relative to weight
• Best suited to soft-bottom anchorages; use more scope in variable bottoms

What hardware is included and why does it matter?

Everything required to rig a basic rode is in the kit: the anchor, chain, rope, two shackles, and a stainless steel thimble. The short chain section helps the anchor orient and absorb shock at the anchor point, while the nylon rope provides stretch to dampen loads and resist chafe. Galvanized components and the stainless thimble resist corrosion for longer service life in marine conditions.

• 6.5 ft of 5/16" hot-dipped galvanized chain for proper anchor angle
• 3/8" x 100 ft marine-grade nylon rope with stainless thimble for durability
• Two 5/16" hot-dipped galvanized shackles for secure connections

Is this anchor kit sized correctly for my boat and how should I rig it?

The 13 lb anchor is aimed at boats 20–32 ft; pairing the anchor weight with the included nylon rode and chain creates an appropriate system for that size range. For routine use, attach the chain to the anchor, run the chain to the bow roller, then tie the nylon rode to the chain using the stainless thimble and a shackle or splice. Always add scope—typically 5:1 to 7:1—depending on depth and conditions to increase holding power.

• Rated for 20–32 ft boats when used with recommended scope
• Connect chain to anchor and rope to chain using the supplied thimble and shackles
• Adjust rode scope according to depth and wind or current

How does the kit stand up to saltwater and long-term use?

Hot-dipped galvanizing and a stainless steel thimble slow corrosion and extend service life in marine environments. Marine-grade nylon resists rot and UV degradation better than many ropes and offers shock absorption under load. Routine rinsing after saltwater use and periodic inspection of shackles and splices will keep the system dependable season after season.

• Hot-dipped galvanized metal resists rust in salt and fresh water
• Marine-grade nylon rope resists UV and moisture damage while providing stretch
• Stainless thimble prevents wear at the connection point

Who this is for: Boat owners of pontoons, small fishing boats, deck launches, and 20–32 ft sail or powerboats looking for a compact, ready-to-rig anchor system will find this kit convenient and economical. It suits weekend boaters and anglers who need a corrosion-resistant, easy-to-handle anchor setup that includes both chain and rope, plus the basic shackles and thimble to begin anchoring right away.