CONBOLA Suction Cup Hooks for Camping and Car, Fluorescent Green Line With Clips Set, Black, 8 Pieces, 10kg Hold

CONBOLA Suction Cup Hooks 8 pcs are heavy-duty, reusable suction anchors with integrated hooks and tarp clips designed to secure awnings, tarps, gear, and accessories to smooth surfaces like glass, metal, and tile.

Lightweight yet strong, this eight-piece kit combines high-adhesion suction cups, stainless-steel springs, and rotatable nylon clips to create versatile tie-down points for camping, road trips, and vehicle storage. Each cup is made from heat-resistant materials and engineered to restore grip after simple cleaning, making them a practical accessory for SUVs, campers, boats, RVs, windows, and household smooth surfaces.

How much weight can each suction cup hold?

Each suction anchor is rated to support roughly 10 kg (about 22 lbs) when attached to a clean, flat surface. Actual holding capacity depends on the surface condition and correct installation.

• Individual rated strength: ~10 kg (22 lbs)
• Best performance on clean, non-porous surfaces like glass or metal
• Re-clean cup with water if suction weakens to restore adhesion
• Avoid textured or painted surfaces for maximum security

How do I install and remove the suction cup safely?

Installation requires only pressing the cup flat against the surface and rotating the locking handle to create a vacuum seal. Removal is simple: release the lock and lift the edge of the cup to let air back in—no tools or drilling needed.

• Press the cup firmly against a smooth spot before turning the handle
• Rotate lock until it feels snug; test with light pull before loading
• To remove, unlock and lift the rim to break the seal—no surface damage
• Clean with water if grip declines from dirt or dust

What accessories are included and how are they used for camping?

The set contains eight suction cups plus four heavy-duty tarp clips so you can fasten tarps, awnings, or gear lines to a vehicle or window. The clips connect to straps, bungee cords, or rope; the hook or clip rotates for better alignment with your load.

• 8 suction anchors for multiple tie-down points
• 4 rotatable nylon tarp clips to secure fabric edges or cords
• Stainless steel springs and upgraded silica-gel cups resist heat
• Hook and clip components can be used separately for flexibility

How long do these suction cups last and how do I maintain them?

Constructed from ABS, PVC, stainless springs, and durable silica gel, these cups are built to resist temperature and corrosion when used properly. Regular cleaning and avoidance of rough or uneven surfaces preserve the seal and extend life.

• Heat resistant up to typical outdoor temperatures; no melting below 105°C
• Wipe off dust and debris; rinse the cup and dry to recover adhesion
• Store in a cool, shaded place when not in use to protect materials
• Replace if cup becomes cracked or permanently deformed

Who is this for? If you travel with a camper, drive an SUV or van, boat, or need temporary mounting points around the home, this CONBOLA kit gives you flexible, non-invasive anchors without drilling. It fits outdoor adventurers who rig awnings and tarps, DIYers who want damage-free hooks on glass or metal, and families seeking quick, removable hanging points for towels, tools, or decorations.