SummerHouse Multi-Ring Golf Iron Ferrules 0.355" or 0.370" Shaft Fit — ABS Durable, 10-Pack

SummerHouse Multi-Ring Golf Iron Ferrules are colored, durable ABS ferrules designed to fit 0.355" tapered steel shafts and 0.370" parallel steel shafts, providing a neat, protective finish between shaft and clubhead.

These ferrules let you replace or customize the visual finish at the hosel while protecting the shaft and epoxy joint. Each set is injection-molded from ABS plastic for resilience during installation and play. Available in two internal diameters—0.355" for tapered steel shafts and 0.370" for parallel steel shafts—these ferrules include multi-ring styling to match modern and classic club designs. Ten pieces come in a pack so you have spares for several irons or for future re-shafting projects.

Which shaft sizes will these ferrules fit?

SummerHouse ferrules are made to fit the two most common steel shaft inner diameters. Choose the 0.355" ferrules for tapered shafts and the 0.370" ferrules for parallel shafts. The outer dimensions are engineered for a snug, flush fit with typical iron heads.

• 0.355" ferrule fits 0.355" tapered steel shafts
• 0.370" ferrule fits 0.370" parallel steel shafts
• Outer diameter: 0.550" for a clean hosel profile
• Length: 1.0" to cover the shaft-hosel junction adequately

How do these ferrules help during club assembly or re-shafting?

The ferrules act as a tidy transition piece between shaft and head, concealing epoxy and providing a uniform look. They reduce the risk of direct metal-to-metal contact at the hosel and help center the shaft while the adhesive cures.

• Protects the shaft end and epoxy joint from wear
• Offers a centered fit to aid alignment during gluing
• Multi-ring styling masks small imperfections at the hosel
• Ten pieces provide multiple replacements or a full iron set coverage

What are the materials and durability expectations?

These ferrules are molded from ABS, a common thermoplastic chosen for toughness and dimensional stability. ABS stands up to typical temperature swings and handling seen in clubbuilding and maintains its shape when seated properly on the shaft.

• Material: rugged ABS plastic for impact and wear resistance
• Consistent molding ensures uniform ring definition
• Designed to resist cracking when pressed onto steel shafts
• Color options provide cosmetic refreshes without repainting

How do I install them and what should I prepare?

Installation is straightforward for any club builder or golfer with basic tools. Clean and dry the shaft tip and hosel, apply a thin layer of appropriate epoxy or cement, and press the ferrule onto the shaft until it seats flush with the head. Allow adhesive to cure fully before striking balls.

• Prep: remove old ferrule and clean shaft end and hosel interior
• Adhesive: use a club-building epoxy or recommended cement
• Fit test first: dry-fit to confirm correct internal diameter
• Curing: follow epoxy instructions; avoid use until fully set

Who is this for? These SummerHouse ferrules are aimed at golfers, club-fitters, and DIY re-shafters who need reliable, attractive hosel trim for steel irons. If you’re replacing worn ferrules, changing shaft types, or customizing iron aesthetics, the 10-piece pack and two size options make it simple to match typical tapered or parallel steel shafts. They’re also a cost-effective choice for shops that refurbish multiple clubs.