WAREMAID Wall Ceiling Mount Bracket for Suspension Straps, 2 Pack, 304 Stainless Steel, 2800 lb Capacity

WAREMAID 2 Pack Wall Ceiling Mount Bracket is a heavy-duty stainless steel anchor set designed to secure suspension straps, gymnastic rings, battle ropes, hammocks, and boxing equipment with a rated capacity up to 2,800 pounds.

Whether you're outfitting a garage gym, backyard training area, or indoor studio, these mount brackets provide a compact, durable attachment point for a wide range of bodyweight and resistance workouts. The pair includes mounting hardware for wood and concrete installations and is made from 304 stainless steel to resist corrosion and endure frequent use.

How do I install the WAREMAID mount on wood or concrete?

Installation is straightforward and requires basic tools. For wood beams, drill small pilot holes before driving the wood screws through the hanger base; for concrete, use a 0.47" masonry bit and the supplied expansion bolts to secure the anchors.

• Mark hole locations on the beam or ceiling before drilling.
• Wood: pilot holes with a <0.2" bit, then tighten wood screws.
• Concrete: drill 0.47" holes, insert expansion bolts, then tighten.
• Check welds and fasteners before each use for safety.

What equipment can I hang from these brackets?

The brackets work as a universal anchor point for many training and leisure items. Use them with suspension straps, CrossFit rings, battle rope anchor kits, hammocks, swings, heavy bags, punching bags, and resistance band setups.

• Compatible with most suspension strap and ring systems.
• Suitable for battle rope anchors and boxing equipment.
• Can hang hammocks, swings, and hanging chairs when mounted to proper structure.
• Not recommended for unsupported or fragile surfaces.

How strong and durable are the WAREMAID brackets?

Constructed from 304 stainless steel, these brackets resist rust and offer high hardness for repeated loading. The manufacturer rates the combined load capacity up to 2,800 pounds, but safe use depends on correct installation into structurally sound wood or concrete.

• Made from corrosion-resistant 304 stainless steel.
• One-piece design reduces weak points and simplifies mounting.
• Rated up to 2,800 lb when properly installed on solid structure.
• Regularly inspect parts and welds for wear or damage.

What comes in the package and what should I check before use?

The set ships with two mount brackets, four expansion bolts, and four wood screws for a complete twin-anchor setup. Before use, verify the surface strength, confirm all screws and bolts are tightened, and inspect the hangers and welding for integrity.

• Includes: 2 wall/ceiling brackets, 4 expansion bolts, 4 wood screws.
• Verify installation surface (stud, beam, or properly anchored concrete).
• Test anchors gradually with light loads before full use.
• Contact WAREMAID support for questions or concerns.

Who is this for: The WAREMAID 2 Pack Mount Bracket is aimed at home gym builders, CrossFit and calisthenics practitioners, trainers fitting small studios, and anyone wanting a reliable anchor for swings, hammocks, or punching bags. It’s best for users who can install into solid wood or concrete and who will follow safety checks before each session. If you need a compact, corrosion-resistant anchor point that accommodates a wide variety of hanging equipment, this bracket set is a practical option.