Anchor-Man Fluke Anchor Kit 13 LB, 75 ft Rope, Chain and PVC Bag for Boats to 30 ft

A complete 13 lb fluke anchor kit from Anchor-Man that includes 75 ft of rope, a short length of chain, two shackles and a heavy PVC anchor bag—ready to secure boats up to 30 ft.

This Anchor-Man kit pairs a proven galvanised fluke anchor with a chain lead and ample rode, plus a purpose-built PVC bag to protect your boat locker from rust and abrasion. The fluke design is intended to dig into sand and mud, offering holding power well above its weight when deployed with the recommended scope. Everything needed for a simple, reliable anchoring setup is included so you can anchor and stow with confidence.

How does this kit prevent rust and locker damage?

The supplied heavy black PVC anchor bag isolates the galvanised anchor from your boat’s interior, stopping metal-on-metal contact and the rust stains that follow. Storing the anchor in the bag after rinsing prevents continued corrosion and protects gelcoat and painted surfaces inside the locker.

• PVC bag fully encloses anchor to block rust transfer
• Rinse before bagging to remove salt and grime
• Bag prevents anchor scraping stainless or aluminium fittings
• Durable material stands up to repeated wet storage

Will 13 lb hold my boat and what rode length is appropriate?

A 13 lb fluke anchor is designed to hold boats up to about 30 ft when used on typical sand or mud bottoms. The kit includes 75 ft of rope which gives the correct scope for anchoring in roughly 10–15 ft of water when you use recommended scope ratios.

• Suitable for boats up to 30 ft under normal conditions
• 75 ft of rode accommodates 10–15 ft water depths at 5:1–7:1 scope
• Fluke blades bury into sand/mud for strong holding relative to weight
• Chain lead helps the shank lay flat so flukes can set properly

What components are included and why each matters?

The kit ships complete: a 13 lb galvanised fluke anchor, a length of chain, 75 ft of rope, two shackles and the PVC storage bag. The chain lead keeps the anchor’s shank low so the flukes can dig, shackles provide secure connections, and the bag preserves your boat interior.

• 13 lb galvanised fluke anchor for burying in soft bottoms
• Chain segment to weight the rode and orient the anchor
• Two shackles for secure, replaceable attachments
• PVC anchor bag for clean, protected storage after use

How do I rig and set this anchor correctly?

Attach the chain between the anchor and rope using the included shackles, stop the boat before dropping the anchor, then let out 5–7 ft of rode for every foot of water depth. Once enough rode is out, gently back down so the flukes can bury; rinse and bag the anchor before stowing to prevent corrosion.

• Shackle chain to anchor, then shackle rope to the chain
• Drop with the vessel stopped; pay out recommended scope
• Reverse slowly to set the flukes in the seabed
• Rinse salt off and place anchor in the PVC bag for storage

Who this is for: Sailors and powerboaters who want an all-in-one anchoring solution for small to mid-sized craft will appreciate this Anchor-Man kit. It suits weekenders, trailer-boat owners and anyone who values tidy locker storage, reliable holding in sand or mud, and the convenience of all necessary fittings included in one box.