Insaga 17'' Sand Anchor for Boat with 32ft Rope, 304 Stainless Steel Screw-In Anchor with Removable Crossbar

This compact sand anchor is engineered for beach, sandbar and shallow-water mooring where conventional flukes struggle. Constructed from 12 mm 304 stainless steel with a wide double-sided helix and a removable 30 mm crossbar, the spike screws into soft substrates to resist pullout and drifting. The kit ships with a stainless carabiner and a 32-foot polyethylene rope, giving you an out-of-the-box anchoring solution for day trips or short stays.

How does the Insaga sand anchor hold in soft sand and shallow water?

The anchor relies on a deep helix and solid shaft to form a screw-like bond with sand, increasing resistance to lateral pull. The broad, double-sided spiral displaces sand and compacts it around the shaft for a firmer grip than straight spikes or small flukes.

• 17-inch length gives adequate embedment in common beach sand depths
• Double-sided 30 mm helix increases surface contact with substrate
• Fully welded 12 mm 304 stainless construction resists bending under load
• Crossbar provides torque during installation for deeper set

How do I install, secure and remove the 17" screw-in anchor?

Installation is manual and straightforward: insert the removable crossbar into the top sleeve, twist the anchor clockwise to screw it into the sand until the helix is buried. Attach the included carabiner and rope to your bow or cleat. To remove, pull out the crossbar and rotate counterclockwise while steadying the boat.

• Use the crossbar for leverage while turning into the sand
• Stop when the top sleeve sits near sand level to maximize hold
• Attach rope with the supplied stainless carabiner for a secure connection
• Reverse rotation and lift straight up to extract—no digging required

Which craft and conditions is this anchor best suited for?

The Insaga sand anchor is optimized for small to medium personal watercraft and light boats in calm to moderate conditions where sandy bottom or sandbars are present. It is not intended as a deep-water mooring anchor for heavy commercial vessels or rocky bottoms.

• Ideal for kayaks, canoes, jet skis, PWCs, inflatables and pontoons
• Designed for sandy beaches, sandbars, shallow coastal shelves and lakes
• Not recommended for rock, heavy kelp or compact clay bottoms
• Best used in low to moderate current and wind conditions

What materials and accessories are included, and how do they affect longevity?

The anchor and crossbar are made from 304 (SUS304) stainless steel, offering a strong balance of corrosion resistance and toughness for marine environments. The package includes a 32-foot PE rope and a stainless carabiner so you can deploy immediately without sourcing extras.

• 304 stainless steel reduces rusting and prolongs service life in saltwater use
• Fully welded helix and shaft prevent loosening at joints under load
• 32 ft polyethylene rope resists rot and dries quickly after use
• Removable crossbar stored separately minimizes bulk when stowed

Who is this for: The Insaga 17" sand anchor is made for paddlers and small-boat owners who need a portable, dependable anchoring option for beaches, sandbars and shallow shorelines. If you value straightforward installation, stainless durability and a compact kit with rope and carabiner included, this anchor delivers a practical solution for day anchoring and light overnight holds in sandy conditions.